Installing your Liner Pack

​​

1. Carefully remove the liner pack from the shipping carton, using caution when cutting open the package.

2. Fold the top flaps down to the outside and tape them in place using the fiber-reinforced tape provided in your starter kit.

3. Fold both inner bags over the top of the box.

4. Remove two of the absorbent pads for use later when closing your liner pack.

5. Slide the box and liner into your collection kiosk.

​

​

Removing your Liner Pack

​​

1. Remove the full liner from your collection kiosk, cut open the clear plastic envelope on the box, and remove the items.

2. Place one absorbent pad on top of the medications.

3. Unfold the inner bag, twist clockwise a minimum of four times, squeeze out
   any air, fold excess over itself, and secure with the included black zip tie.

4. Place the remaining absorbent pad on top of the sealed inner bag.

5. Unfold the second bag, twist clockwise a minimum of four times, squeeze out
   any air, fold excess over itself, and secure with the remaining black zip tie and the white serial-numbered zip tie.

6. Cut the tape holding down the box flaps and fold the flaps in, starting with the
   shorter flaps.

7. Using the fiber reinforced tape provided in your starter kit secure two layers on each seam. The ends must wrap the sides a minimum of 5”.

8. Cover all seams with tamper evident tape.

9. Your box has a prepaid UPS shipping label already affixed. You can give the
   box to any UPS driver.

View more detailed instructions here: Single Liner Instructions